1-800 708 4955     
Pellet Stove Parts S1902/HP22
RC1902 Remote Control
Ár$49.00
Sale$39.00
Megtakarítás$10.00 (20%)
KódRC1902
Értékelés átlagaÉrtékeld!(0)
db
RC1902: Remote Control to operate manual mode, temperature, on/off and hold/unhold- for model S1902 and HP-22.
CB1902 Control Board
Ár$249.00
Sale$219.00
Megtakarítás$30.00 (12%)
KódCB1902
Értékelés átlagaÉrtékeld!(0)
db
CB1902: Software based control board mounted at rear top of pellet stove - for model S1902 and HP-22.
RIB1902 Cable
Ár$49.00
Sale$39.00
Megtakarítás$10.00 (20%)
KódRIB1902
Értékelés átlagaÉrtékeld!(0)
db
RIB1902:
Ribbon cable that connects the program board with the power board - for model S1902 and HP-22.
EXM1902 Exhaust Motor
Ár$219.00
Sale$189.00
Megtakarítás$30.00 (14%)
KódEXM1902
Értékelés átlagaÉrtékeld!(0)
db
EXM1902: Exhaust blower has a vertical position for minimum wear on bearings and is located at rear right of pellet stove, quite operation, speed is controlled by computer for maximum efficiency - for model S1902 and HP-22.
AUM1902 Auger Motor
Ár$229.00
Sale$189.00
Megtakarítás$40.00 (17%)
KódAUM1902
Értékelés átlagaÉrtékeld!(0)
db
AUM1902: A new and unique Auger motor design to give more reliability and strength with  a very quite operation, located at rear of pellet stove just bellow hopper - for model S1902 and HP-22.
COF1902 Convection Blower / Motor
Ár$229.00
Sale$189.00
Megtakarítás$40.00 (17%)
KódCOF1902
Értékelés átlagaÉrtékeld!(0)
db
COF1902: A squall cage design convection motor with a very quite operation is located at the center / rear of the fire box, can be removed very quickly, the speed is controlled by computer for maximum efficiency - for model S1902 and HP-22.
MCA1902 Auger Motor Capacitor
Ár$29.00
Sale$19.00
Megtakarítás$10.00 (34%)
KódMCA1902
Értékelés átlagaÉrtékeld!(0)
db
MC1902: Motor capacitor which is clipped onto frame close to auger motor. Gives more stability and torque to auger motor - for model S1902 and HP-22.
IG1902 Igniter
Ár$159.00
Sale$139.00
Megtakarítás$20.00 (13%)
KódIG1902
Értékelés átlagaÉrtékeld!(0)
db
IG1902:    
Used for igniting the pellets, to allow for automatic operation for model S1902 and HP-22. The pellet stove Igniter comes with the cable and connector.
The collar/nut on older igniters needs to be removed and put onto the new igniter, also the elect. connector on old igniter needs to be cut and re-connected to the new igniter.

TC1902 Thermostat Closing
Ár$29.00
Sale$25.00
Megtakarítás$4.00 (14%)
KódTC1902
Értékelés átlagaÉrtékeld!(0)
db
TC1902: Thermostat located on the exhaust motor housing to let the computer know that a fire has been established. Closes at 120F - for model S1902 and HP-22.
THI1902 Thermostat High Limit
Ár$39.00
Sale$35.00
Megtakarítás$4.00 (10%)
KódTHI1902
Értékelés átlagaÉrtékeld!(0)
db
TH1902: High limit thermostat located at the rear left side of body, lets the computer know that a too high of a temperature has been reached - for model S1902 and HP-22.
Kosár
A bevásárlókosara üres!
Nyelvek
Arabic Brazilian Czech German Greek English Spanish Finnish French Croatian Hungarian Italian Lithuanian Latvian Dutch Norweigian Polish Portuguese Russian Slovak Swedish Turkish Ukrainian Vietnamese