1-800 708 4955     
Pellet Stove Parts S1902/HP22
RC1902 Remote Control
Pris$49.00
Sale$39.00
Du sparar$10.00 (20%)
ArtikelnrRC1902
MedelbetygBetygsätt!(0)
Antal
RC1902: Remote Control to operate manual mode, temperature, on/off and hold/unhold- for model S1902 and HP-22.
CB1902 Control Board
Pris$249.00
Sale$219.00
Du sparar$30.00 (12%)
ArtikelnrCB1902
MedelbetygBetygsätt!(0)
Antal
CB1902: Software based control board mounted at rear top of pellet stove - for model S1902 and HP-22.
RIB1902 Cable
Pris$49.00
Sale$39.00
Du sparar$10.00 (20%)
ArtikelnrRIB1902
MedelbetygBetygsätt!(0)
Antal
RIB1902:
Ribbon cable that connects the program board with the power board - for model S1902 and HP-22.
EXM1902 Exhaust Motor
Pris$219.00
Sale$189.00
Du sparar$30.00 (14%)
ArtikelnrEXM1902
MedelbetygBetygsätt!(0)
Antal
EXM1902: Exhaust blower has a vertical position for minimum wear on bearings and is located at rear right of pellet stove, quite operation, speed is controlled by computer for maximum efficiency - for model S1902 and HP-22.
AUM1902 Auger Motor
Pris$229.00
Sale$189.00
Du sparar$40.00 (17%)
ArtikelnrAUM1902
MedelbetygBetygsätt!(0)
Antal
AUM1902: A new and unique Auger motor design to give more reliability and strength with  a very quite operation, located at rear of pellet stove just bellow hopper - for model S1902 and HP-22.
COF1902 Convection Blower / Motor
Pris$229.00
Sale$189.00
Du sparar$40.00 (17%)
ArtikelnrCOF1902
MedelbetygBetygsätt!(0)
Antal
COF1902: A squall cage design convection motor with a very quite operation is located at the center / rear of the fire box, can be removed very quickly, the speed is controlled by computer for maximum efficiency - for model S1902 and HP-22.
MCA1902 Auger Motor Capacitor
Pris$29.00
Sale$19.00
Du sparar$10.00 (34%)
ArtikelnrMCA1902
MedelbetygBetygsätt!(0)
Antal
MC1902: Motor capacitor which is clipped onto frame close to auger motor. Gives more stability and torque to auger motor - for model S1902 and HP-22.
IG1902 Igniter
Pris$159.00
Sale$139.00
Du sparar$20.00 (13%)
ArtikelnrIG1902
MedelbetygBetygsätt!(0)
Antal
IG1902:    
Used for igniting the pellets, to allow for automatic operation for model S1902 and HP-22. The pellet stove Igniter comes with the cable and connector.
The collar/nut on older igniters needs to be removed and put onto the new igniter, also the elect. connector on old igniter needs to be cut and re-connected to the new igniter.

TC1902 Thermostat Closing
Pris$29.00
Sale$25.00
Du sparar$4.00 (14%)
ArtikelnrTC1902
MedelbetygBetygsätt!(0)
Antal
TC1902: Thermostat located on the exhaust motor housing to let the computer know that a fire has been established. Closes at 120F - for model S1902 and HP-22.
THI1902 Thermostat High Limit
Pris$39.00
Sale$35.00
Du sparar$4.00 (10%)
ArtikelnrTHI1902
MedelbetygBetygsätt!(0)
Antal
TH1902: High limit thermostat located at the rear left side of body, lets the computer know that a too high of a temperature has been reached - for model S1902 and HP-22.
Varukorgen
Din varukorg är tom!
Språk
Arabic Brazilian Czech German Greek English Spanish Finnish French Croatian Hungarian Italian Lithuanian Latvian Dutch Norweigian Polish Portuguese Russian Slovak Swedish Turkish Ukrainian Vietnamese