3PVP-HC: Use for horizontal terminations only. The Horizontal Cap can be
turned at the gore to direct exhaust output. Designed to create
a venturi effect to force exhaust out. Made of a laser-welded,
super-ferritic stainless steel inner wall that is scientifically proven
to resist corrosion from corn and other biofuels. Outer wall made
of laser-welded stainless steel.

3PVP-WT3: Use for through-the-wall installations. Fits between standard
wall studs. Comes with an insulation ring to reduce air infiltration
where the pipe slips through the thimble.

Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish. 3PVP-ADFF:
Use to connect PelletVent Pro to BioFlex when relining a
masonry chimney. Only approved for use with BioFlex.

Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish. 3PVP-ADFM:
Use to connect BioFlex to PelletVent Pro when relining a masonry
chimney. Only approved for use with BioFlex.

Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish. PVP-FTC: Use
to connect PelletVent Pro rigid pipe to a masonry chimney
with stainless steel flexible relining. Female end swivels to allow
ease of connection.

Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish. 3PVP-TAD: Use for a 90° offset. Attaches directly to appliance as an adapter.
Removeable twist-lock Clean-Out Tee Cap.

Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish. 3PVP-TADX4: Use for a 90° offset. Attaches directly to appliance as an
adapter. Converts a 3” appliance to a 4” PelletVent Pro system.
Removeable twist-lock Clean-Out Tee Cap.

Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish.3PVP-WSA: Use to support vent pipe or tee sections. Adjusts to provide
1”- 3” clearance.

Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish.3PVP-CS: Use to support pipe. May be used on flat ceilings. Painted black.
Trim and clamp included.

Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish.3PVP-SC:
Use to maintain a weather tight resistant seal between the pipe
and the flashing.