Votre Panier
Votre panier est vide
Pellet Stove Parts S1902/HP22
RC1902 Remote Control
Prix 49.00
Vente32.00
Vous économisez 17.00 (35%)
CodeRC1902
Average RatingNoter(0)
Quantité
RC1902: Remote Control to operate manual mode, temperature, on/off and hold/unhold- for model S1902 and HP-22.
CB1902 Control Board
Prix 249.00
Vente219.00
Vous économisez 30.00 (12%)
CodeCB1902
Average RatingNoter(0)
Quantité
CB1902: Software based control board mounted at rear top of pellet stove - for model S1902 and HP-22.
RIB1902 Cable
Prix 49.00
Vente39.00
Vous économisez 10.00 (20%)
CodeRIB1902
Average RatingNoter(0)
Quantité
RIB1902:
Ribbon cable that connects the program board with the power board - for model S1902 and HP-22.
EXM1902 Exhaust Motor
Prix 219.00
Vente189.00
Vous économisez 30.00 (14%)
CodeEXM1902
Average RatingNoter(0)
Quantité
EXM1902: Exhaust blower has a vertical position for minimum wear on bearings and is located at rear right of pellet stove, quite operation, speed is controlled by computer for maximum efficiency - for model S1902 and HP-22.
AUM1902 Auger Motor
Prix 229.00
Vente189.00
Vous économisez 40.00 (17%)
CodeAUM1902
Average RatingNoter(0)
Quantité
AUM1902: A new and unique Auger motor design to give more reliability and strength with  a very quite operation, located at rear of pellet stove just bellow hopper - for model S1902 and HP-22.
COF1902 Convection Blower / Motor
Prix 229.00
Vente189.00
Vous économisez 40.00 (17%)
CodeCOF1902
Average RatingNoter(0)
Quantité
COF1902: A squall cage design convection motor with a very quite operation is located at the center / rear of the fire box, can be removed very quickly, the speed is controlled by computer for maximum efficiency - for model S1902 and HP-22.
MCA1902 Auger Motor Capacitor
Prix 29.00
Vente19.00
Vous économisez 10.00 (34%)
CodeMCA1902
Average RatingNoter(0)
Quantité
MC1902: Motor capacitor which is clipped onto frame close to auger motor. Gives more stability and torque to auger motor - for model S1902 and HP-22.
IG1902 Igniter
Prix 159.00
Vente139.00
Vous économisez 20.00 (13%)
CodeIG1902
Average RatingNoter(0)
Quantité
IG1902:    
Used for igniting the pellets, to allow for automatic operation for model S1902 and HP-22. The pellet stove Igniter comes with the cable and connector.
The collar/nut on older igniters needs to be removed and put onto the new igniter, also the elect. connector on old igniter needs to be cut and re-connected to the new igniter.

TC1902 Thermostat Closing
Prix 29.00
Vente25.00
Vous économisez 4.00 (14%)
CodeTC1902
Average RatingNoter(0)
Quantité
TC1902: Thermostat located on the exhaust motor housing to let the computer know that a fire has been established. Closes at 120F - for model S1902 and HP-22.
THI1902 Thermostat High Limit
Prix 39.00
Vente35.00
Vous économisez 4.00 (10%)
CodeTHI1902
Average RatingNoter(0)
Quantité
TH1902: High limit thermostat located at the rear left side of body, lets the computer know that a too high of a temperature has been reached - for model S1902 and HP-22.
Offres Spéciales
Pellet Stove  S1902 / HP22
Prix 1,999.00
Vente1,399.00
Best Value for the money!
Limited stock at this price!
Only $1399
Pellet Stove  S1802  / HP50
Prix 1,999.00
Vente1,499.00
Best Value for the money!
                               Limited stock at this price!
Only $1499
Order Today 1-800 708 4955