Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish. 3PVP-WS: Use
 to support vent pipe or tee sections. Provides 1” clearance.

Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish. 3PVP-20BF 3" X 15' STAINLESS STEEL LINER

Features fully unitized, twist-lock construction in 3” and 4”
diameters. Listed at 1” clearance to combustibles in the USA
and Canada. It can be used in both vertical and horizontal
installations. Stainless steel welded seam inner wall, combined
with a galvalume welded seam outer wall. Pipe OD is diameter
plus 5⁄8”. Galvalume or painted black outer finish. 12” length

Flatwall Bianco Brown: 40x40 DL-BBR - Tile Series, used against a straight wall.

3PVP-AD: Used to attach to appliance outlet allowing for easy pipe
connection. Allows connect 3”vent and 4" ( with adapter ).
Seal adapter to appliance with high temperature sealant.

3PVP-X4AD: Use to attach to appliance outlet allowing for easy pipe
connection. Allows connection of 4” vent to 3” appliance outlet.
Seal adapter to appliance with high temperature sealant.

RC1902: Remote Control to operate manual mode, temperature, on/off and hold/unhold- for model S1902 and HP-22.

CB1902: Software based control board mounted at rear top of pellet stove - for model S1902 and HP-22.

PB Board1902 : This board is located at the  left side of the pellet stove behind the rear left panel. From here the different components receive their power to operate - for model S1902 and HP-22.

FS1902: Control board fuse - for model S1902 and HP-22.